Hematite

Product Description
Ferric Iron Oxide is a unique natural red hematite produced through beneficiation & fine grinding of our exclusive domestic ore body. This product may be used in ferrite, Glass, Oil Drilling

Physical Characteristics
Color is steel or silver gray to black in some forms and red to brown in earthy forms. Sometimes tarnished with irredescent colors when in a hydrated form (called Turgite).
Luster is metallic or dull in earthy and oolitic forms.
Transparency: Crystals are opaque.
Crystal System is trigonal; bar 3 2/m
Crystal Habits include tabular crystals of varying thickness sometimes twinned, micaceous (specular), botryoidal and massive. also earthy or oolitic.
Cleavage is absent however there is a parting on two planes.
Fracture is uneven.
Hardness is 5 - 6
Specific Gravity is 5.3 (slightly above average for metallic minerals)
Streak is blood red to brownish red for earthy forms.

Technical Specefication
Physical State : Powder, Solid, Crystals
Usage : Industrial, Laboratory

Product Description
Ready to use cementitious waterproof coloured tile joint filler.
It is a gap filling material between different wall and floor tiles like ceramic, glazed, vitrified, mosaic, glass mosaic and marble tiles etc.

Uses
Onmix Tile grout is a gap filling material between different wall and floor tiles like ceramic, glazed, vitrified, mosaic, glass mosaic and marble tiles etc.

Characteristics / Advantages
Cementitious, only water to be added Available in standard Onmix shades Resistant to dust penetration. Excellent bond with tiles. Easy to Clean.

Product Data
Form Appearance / Colours Ivory, white, black, grey, sky blue, cream.
Packaging: 1kg Bag


Product Details :

Minimum Order Quantity	1 Metric Ton
Color	Colours Ivory, white, black, grey, sky blue, cream.
Packaging Size	1kg
Packaging Type	HDPE Bags
Shelf Life	6 Months from the date of Manufacturing
Form	Powder
Grade	Technical

Storage Conditions / Shelf-Life
6 months from date of production if stored properly in undamaged original sealed packaging in dry and cool conditions.

Technical Date
Chemical Base: Cement, selected fillers and additives

Substrate Quality
All dust, loose and friable particles must be completely removed from all surfaces before application of the product, preferably by brush and/or vacuum. The adhesive or mortar used for bedding the tiles must be completely cured before application of Onmix Tile grout.

Application Instructions
Mixing 350-380 gm per water per 1kg pack of Onmix tile grout.

Application Method / Tools
Tile grout. is applied by trowel, spatula into the joint. Then "smooth" evenly to level and finish. After that remove residual material with a spatula and clean the surface with a sponge and water. Do not press on or into the joints.

Notes on Application / Limitations
Apply only to sound, prepared substrates. Always use in a small area at a time so that excess grout can be cleaned from the tile surface as soon as possible by using water with a dry sponge or cloth During cleaning move the sponge crosswise to the joints and not along the joints Protect freshly applied material from water.